Master decorators acrylic fillercoat exhibits the following features:
| Water based, so cleaning of equipment is a feast
| Ultra matt finish
| It has superior hiding power
| It contains no harmful agents
| It has an agreeable odour on application which will disappear in a short period of time
| It is manufactured from a high quality acrylic emulsion
| Excellent adhesion
| Water based
| Only requires one coat on most surfaces
| Can easily over coated
Master decorators acrylic fillercoat can be used on the following surfaces:
| Ceilings
| As first coat on cement plastered walls
Application procedures
| Clean all surfaces from dust, oil or other contaminants
| If necessary a primer or sealer can be used depending on the nature of the substrate
| Defects can be filled with an appropriate filler
| Master decorators acrylic fillercoat can be applied by roller, brush or roller
| Stir thoroughly before use
| One coat of Master decorator’s acrylic fillercoat should be sufficient on most surfaces.
| As this material is very easy to apply, care should be taken not to overspread
| After application, the equipment and any spillage can be cleaned with water and soap followed by thorough rinsing with clean water
Maintenance of master decorator’s acrylic fillercoat painted surfaces
| Surfaces that have been coated with Master decorator’s acrylic fillercoat are very easy to maintain-Just wash with an ordinary household cleaner or soft soap by using a soft cloth and it will be restored to its original pristine condition
Product information
| Master decorators acrylic fillercoat is supplied in 1,5 and 20 litre containers
| A wide range of colours is available
| It has a spreading rate of 10-12 Metres² per litre (depending on colour)